| Power | AC 220V 50HZ 1 for 3 wire 30A voltage range: not more than [+ 10%] |
| Internal dimension | 80 * 80 * 80 cm (W*H*D) |
| Outer dimension | 100 * 175 * 155 cm (W*H*D) |
| Internal volume | 512L |
| Temperature range | -10 DEG C to +100 DEG C (air-cooled) |
| Humidity range | 20% to 98% RH |
| cooling rate | Normal temperature to -10 C / 30 min (no load) |
| Heating rate | Normal temperature to +100 C / 20 min (no load) |
| control accuracy | The temperature of 0.2 DEG C + 0.5RH humidity |
| Temperature uniformity | 1.5 C |
Material :The inner box is made of SUS304 heat resistant and cold resistant stainless steel plate, and the outer box is made of cold rolled steel plate and sprayed with gray paint
Outer box light source
High brightness lighting lamp
Observation window
Multi layer vacuum glass window (anti fogging function)
Windows anti sweat design
An electric heater is used to prevent condensation of water vapor (40 W)
Test hole
There are test holes between the top of the machine and the top of the machine, which can be connected with the test power line and signal (10 cm)
Machine block
Adjust the placement of the pulley and the fixed position of the strong bolt
Using environment :
Ambient ambient temperature range
I -10 ~+40 DEG C
Relative humidity of environment
Less than 85%RH
Atmospheric pressure intensity
0.086MPa to 0.106MPa
Ambient air requirement
No high concentration dust, flammable and explosive gas or dust, no strong electromagnetic radiation source nearby
The ground is level and well ventilated
There is no strong vibration around.
The temperature and humidity of the circulatory system :
A, moisture collection, special moistureproof and heat dissipation design, stainless steel extended shaft circulating motor
B, high / low temperature aluminum alloy multi wing cycle fan
C, adjustable air deflector design, effectively improve the temperature and humidity distribution uniformity
D, balanced thermostat P.I.D + P.W.M + S.S.R
E, balance wet, P.I.D + P.W.M + S.S.R, main and vice, U type, humidity, electric heating
F, U-Type fin type high speed electric heating tube;
G, electronically coupled micro wetting system
H, evaporator coil dew point temperature (ADP), laminar flow contact dehumidification method;
J, with overheating, overflow double deck protection device;
K, humidification, dehumidification system is completely independent.
Refrigeration system :
A, Europe and America, the original high-efficiency, energy-saving ultra-low temperature refrigeration system (air-cooled cooling mode)
B, ultra high efficiency SWEP plate type cold coal hot and cold exchange design [Sweden system (sus#316)], compared with the traditional internal spiral type, high benefit
C, condenser and evaporator adopt AC&R compound disturbing flow type aluminum fin unit
D, slope evaporator and dew point dehumidification control (WDP)
E, internal spiral K-Type refrigerant copper tube
F, compressor high pressure, high temperature pipeline, anti sweat, moisture-proof treatment
The compatibility and quality stability of G and its components are high.
OEM | ORDER | OF | CLIENT | FOR | RECOMMEND | |||
Model | GTH-040 | GTH-042P | GTH-044P | GTH-046P | GTH-050P | GTH-052P | GTH-054P | GTH-056P |
Internal Dim | 400×550× 450 | 500×600× 500 | 500×750× 600 | 1000×1000× 800 | 400×550× 400 | 500×600× 500 | 500×750× 600 | 1000×1000×800 |
Extrnal Dim | 970×1400×800 | 1070×1450× 850 | 1070×1600× 900 | 1570×1850× 1100 | 970×1400×800 | 1070×1450×850 | 1070×1600×900 | 1570×1850×1100 |
Temp.Range | 0ºC~100ºC(+150ºC) | -20ºC~100ºC(+150ºC) | ||||||
*Telative | 20%~98%R.H. | 20%~98%R.H | ||||||
Cooperated Customers 
Contact US :
Dongguan Jinyao Exactitude Equipment Co., Ltd
Address: Jingfu Road No 36, xiabian village, changan town Dongguan City China
Send your inquiry details in the below,click "Send" now !
Thank you for enter into our website.If you find any product interesting,please feel free to contact me.It is my great pleasure to service for you.