BOSTON , April 27, 2022 /PRNewswire/ -- As electronics being increasingly ubiquitous, there is a clear trend toward greater integration. Rather than simply making space for a rigid 2D circuit board (PCB) within the product, electronic functionality will be either mounted conformally onto surfaces or incorporated within the structural materials.

These emerging manufacturing methodologies can collectively be termed '3D electronics'. They offer greater design freedom, with opportunities for imaginative form factors to provide differentiation in consumer devices. However, this integration of electronic with structural functionality presents questions regarding sustainability.

Ease of recycling is generally the greatest sustainability concern for 3D electronics. Mounting electronic components, such as conductive traces, surface mount devices, micro-controllers, and sensors, within or on the surface of the main structural material makes separating out the different materials for recycling more challenging. In contrast, conventional manufacturing methods mean that the electronics can be removed and then the remaining plastic recycled.

Despite this apparent difficulty, 3D/integrated electronics does offer some benefits to recyclability. The main benefit is the much-reduced material mix, which facilitates separation and sorting. 3D electronics means that components with electronic functionality can be constructed using just four different materials: for example, an LED lightbulb can be made from structural plastic, conductive ink, conductive adhesive, and the LEDs themselves. This is a substantial simplification relative to the conventionally manufactured alternative which generally incorporates a PCB.

An additional benefit of integrating electronics within 3D structures is that recycling instructions can be embedded within the product by incorporating an RFID tag. When scanned on disposal, disassembly instructions, such as the precise location of surface mount components, can be obtained along with the material composition.

Environmental benefits of 3D electronics

When assessing the sustainability of competing manufacturing methodologies, it is important to consider their environmental impact across the entire life cycle, and to also consider secondary consequences. It's here that 3D electronics brings substantial sustainability benefits, primarily because integrating electronic and structural functionality enables a much more compact form factor as there is no need to incorporate a rigid PCB.

This smaller factor brings two main benefits: fewer materials are used, and the device is much lighter. As such, less energy is used to manufacture the materials, and shipping the device (and its constituent parts) is more efficient. Furthermore, if the 3D electronics part is used in an electric vehicle or aircraft then the reduced weight will enable further energy savings.

Given these benefits, complete life cycle analysis (LCA) generally shows a significant sustainability benefit for 3D electronics. While concerns around material separation are valid, this disadvantage is more than made up for by the reduced size, weight, and material mix. Furthermore, recycling technologies such as depolymerization that facilitate material separation are likely to become more widely utilized over time, resolving the main sustainability challenge.

Extensive insight into 3D electronics, including a more detailed assessment of the sustainability challenges and benefits, can be found in the recent IDTechEx report "3D Electronics/Additive Electronics 2022-2032". This assesses the competing technologies that will enable PCBs to be replaced with integrated electronics, saving space, weight and reducing manufacturing complexity. It covers electronic functionality to 3D surfaces, in-mold electronics (IME), and fully 3D printed electronics.

The report includes over 30 detailed company profiles based on interviews with major players across the different technologies. We also develop 10-year market forecasts for each technology and application sector, delineated by both revenue and area. We forecast the gradual decline of LDS and growth in extruded paste for consumer electronic antennas, and increased use of extrusion and aerosol, especially for automotive applications. The most substantial growth is predicted for IME, which we predict will be widely adopted in car interiors and the control panels of white goods. To find out more, please visit www.IDTechEx.com/3DElec. Sample pages are available to download for all IDTechEx reports.

IDTechEx guides your strategic business decisions through its Research, Subscription and Consultancy products, helping you profit from emerging technologies. For more information, contact research@IDTechEx.com or visit www.IDTechEx.com.

Images download: https://www.dropbox.com/sh/fgk1qgwln0dqrcp/AADRMLOQnf7qTeVzmJ56qWYSa?dl=0

Natalie Moreton Digital Marketing Manager press@IDTechEx.com +44(0)1223 812300

Twitter: https://www.twitter.com/IDTechEx LinkedIn: https://www.linkedin.com/company/idtechex/ Facebook: https://www.facebook.com/IDTechExResearch

View original content to download multimedia:https://www.prnewswire.com/news-releases/evaluating-the-sustainability-of-3d-electronics-discussed-by-idtechex-301534140.html

The utility and regulators are still hashing out surprise costs from early 2021 deep freeze that spiked natural gas prices.

Analyst Colin Langan believes the recent raw material spike has delayed cost parity between EVs and gasoline powered cars by "at least a decade."

A Wells Fargo analyst just outlined why GM is in a Catch-22 scenario when it comes to EV production -- and Ford is, too.

Duke Energy’s N.C. carbon plan proposals, due to regulators Monday, will include using small modular reactors. A TVA announcement may lead Duke to opt for the GE Hitachi reactor developed in North Carolina.

Glenn Kaino's magical forest inside a 28,000-square-foot L.A. space is an immersive journey that includes animatronic trees, fire illusions and interactive sound sculptures.

Scientists believe they have finally discovered the trigger for the world’s biggest climate catastrophe. The catastrophe in question took place around 252 million years ago. At the time, the world was going through a “tumultuous period of rapid global warming.” Many previously believed that a volcanic eruption in Siberia was the cause. However, new evidence … The post Scientists finally know what triggered the biggest climate catastrophe in history appeared first on BGR.

Steps include decarbonization, emissions reductions and big boost in renewables and the supply chain.

Elon Musk tweeted early Friday morning that his planned acquisition of the social network was "temporarily on hold." This is a familiar pattern for the tech magnate.

Green Impact Partners Inc. (TSXV: GIP.V) is moving forward with the development of the Future Energy Park – an innovative clean energy project connecting Alberta's agriculture and energy sectors. Located within the City of Calgary, Future Energy Park is a proposed net CO2 negative biofuels facility using non-food grade wheat to produce renewable natural gas ("RNG"), and ethanol.

By James Mandel and Jake Shirmer

A group of 18 penguins waddled down a runway to the ocean after receiving rehabilitation from an Argentinian aquarium.In a press release, Mundo Marino said the group comprised 17 Magellanic penguins and one rockhopper penguin found in the Partido de la Costa region in the Buenos Aires Province between February and April.Fundacion Mundo Marino said that the birds marked 10,000 animals they have helped over the past 40 years.Sergio Rodríguez Heredia, biologist and head of the Fundacion Mundo Marino Rescue Center explained the condition of the birds when they were found (translated by Google Translate): “These birds appeared stranded on the beach with a condition commonly known as the stranded penguin syndrome. They were malnourished and dehydrated, with hypothermia and a high degree of parasitism. Not finding enough food, they lose their ability to thermoregulate …. In some cases, malnutrition was also accompanied by problems shedding their plumage.”The center said they warmed and fed the penguins until they were healthy enough to return to the sea. Credit: Mundo Marino via Storyful

The fate of California's only nuclear power plant is in flux as the state contends with power shortages and struggles to meet clean energy goals.

Southern California is facing unprecedented water restrictions in the face of the worst drought in 1,200 years. Our Masters of Disasters tell us who to blame.

National Hurricane Center in Miami is tracking first tropical wave of 2022 off the coast of Africa. Will it become Alex, season's first named storm?

The case is believed to be the first enforcement action of its kind aimed at preventing the advance of the marbled crayfish The invasive marbled crayfish was named an injurious species in a 2020 Ohio state rule. Photograph: MP cz/Shutterstock They have claws, 10 legs, can produce hundreds of clones of themselves and have escaped from confinement to potentially run amok across the United States. The ecological threat posed by the marbled crayfish has now prompted prosecutors to wield invasive spe

STORY: A massive reservoir stricken by drought in the Colorado River Basin is rapidly drying up.It means tens of millions of people across several U.S. states could face limits on their water.A shortage for Nevada, California, Arizona, and even across the border in Mexico. Nevada says its taking action to ensure its supply. Patti Aaron is with the Bureau of Reclamation. “We're in our 23rd year of drought in the Colorado River Basin. Both Lake Powell and Lake Mead have been declining rapidly during the course of this drought, and Lake Mead is now at its lowest level since it filled."“About 75% of the water goes to irrigation for agriculture. That supplies about 60% of the food for the nation that's grown in the United States."The lake is filled from the Colorado River as snow melts from the mountains. In 1999, it was at 97% capacity. Now it sits at only 30% full.“We depend on the snowpack and in circumstances like this, where we have many years of drought, the soils are extremely dry. So even if we get a good snowpack, when it melts off, it's going to go into the soils and not runoff into the river. So we need at least four years of consecutive good snowpack to start to recover.”Water authorities responsible for Nevada's Las Vegas region have had to activate a $1.5 billion insurance policy, including building a new low-level pumping station.Colby Pellegrino is with the Southern Nevada Water Authority."These facilities took almost two decades of planning, design and construction, so we had to have a lot of foresight into developing them. But they're a giant insurance policy for the community against the current drought."One unexpected consequence of falling water levels: human remains are being found in newly exposed mud.Earlier this month, police found a barrel containing the decomposed body of an unidentified man.Historians speculate he had been shot in the 70s or 80s - and linked it to the Las Vegas mafia.They also said more bodies will likely be similarly found if trends continue.

After baking the state of Texas, an early season heat wave is poised to shatter temperature records across the central and Northeastern sections of the United States in the coming days.

California officials have nixed a proposal for a $1.4 billion desalination plant but say they're open to growing the state's capacity to turn Pacific Ocean seawater into drinking water to buffer against persistent drought. After an hours-long hearing, members of a state coastal panel on Thursday unanimously rejected a proposed desalination plant for Southern California over concerns the facility would kill marine life and drive up the cost of water. The vote by the California Coastal Commission, which is tasked with protecting the state’s scenic shoreline, dealt a blow to the long-running proposal by Brookfield Infrastructure Partners-owned Poseidon Water.

The young black bear “charged and attacked.”